Got a tricky situation right now and need some additional brainpower.
We have a PIX515E running 7.2.2.
We have a L2L VPN tunnel to another company where we have our servers.
This works good.
Now, a server at the other company site needs a public IP and has to go through our own PIX and over the L2L tunnel.
Currently we are NAT'ing all traffic to the other company over the L2L. This works good.
Our server has the IP: 10.1.1.5, and we are giving it a public ip (fake) 188.8.131.52 in my own PIX
How shall I do the static?
Will it be : static (inside,outside) 184.108.40.206 10.1.1.5 netmask 255.255.255.255 ?
Considering that the our server 10.1.1.5 is really "outside" from my PIX point of view?
How shall I turn the traffic around and enter the L2L and get NAT'ed towards the server?
I previously made it possible to VPN to our PIX and then be able to work against the servers with NAT'ing.
Then I just had to add another NAT for (outside) and it worked. I've even tried adding another ACL line and permitting any traffic towards 10.1.1.5. Not working tho
Would really appreciate some help :)