05-26-2008 05:10 AM - edited 03-03-2019 10:05 PM
could you please help
i have 7200 vxr with nbe 400 and Iwant to configure 16 serial interfaces in one bundle.
when I do so the router crashes although I used 12.4(5) version please note that I used STM-1 interface channalized.
05-26-2008 05:26 AM
HI, [Pls Rate if HELPS]
Refer the Previous / earlier POST discussed regarding the same Topic:
Hope I am Informative.
Pls Rate if HELPS => Use the Rating System
Best Regards,
Guru Prasad R
05-26-2008 05:53 AM
Dear
thank you for your response but i asked aboout 7200 vxr nbe400 ram 256
the previous document about 7500 3800 which is not my platform
05-26-2008 05:29 AM
Hi, it is not said that 12.4(5) is the best release for a 7200. For intensive, ISP-like use on 7200 routers, the most stable is 12.2S, currently 12.2(12)S13.
05-26-2008 05:47 AM
I have traid many ios's such 12.3.(23)
and the latest 12.4(19)LD
05-26-2008 05:52 AM
12.2S, note S.
05-26-2008 05:56 AM
what about 12.4(19) entrprise edtion
05-26-2008 06:02 AM
As mentioned above, for intensive use, the most stable and reccomended version is 12.2S.
05-26-2008 06:10 AM
ok but do you think that 16 interfaces can bundle on 7200 vxr or its limit is 8 interfaces only
05-26-2008 06:23 AM
No, the limit is 16.
05-26-2008 06:25 AM
please could you send me the documents which proove that
05-26-2008 06:33 AM
There is no document. This information comes from experience.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide