7206-Router

Unanswered Question
May 26th, 2008
User Badges:

Hi Guys,


Can i configure vlans , VTP and spanning tree in 7206 routers? and can i advertise vlans created in 7206 routers to 3550 switches?


can any body give me URL of sample configuration so i can study the same.


can any body tell me how can i physically connect 7206 router and 3550 swithces ?



Thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Edison Ortiz Mon, 05/26/2008 - 09:19
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Can i configure vlans , VTP and spanning tree in 7206 routers?



Sorry, you can't.


__


Edison.

jerry_best Mon, 05/26/2008 - 09:32
User Badges:

Thanks for your reply,


what about the physical connectivity between 7206 and 3550 ?



Thanks in advance

Edison Ortiz Mon, 05/26/2008 - 10:10
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Yes, physical connectivity can be done:


For instance in the 3550:


switch(config)#vlan 72 name test

switch(config)#exit

switch(config)#interface vlan 72

switch(config-if)#ip address 192.168.1.2 255.255.255.0

switch(config)#interface fx/x

switch(config-if)#description port connecting to 7206

switch(config-if)#switchport mode access

switch(config-if)#switchport access vlan 72


On the router:


router(config)#interface fx/x

router(config-if)#ip address 192.168.1.1 255.255.255.0


You should be able to ping the switch from the router and vice-versa.


HTH,


__


Edison.


Please rate helpful posts

jerry_best Tue, 05/27/2008 - 10:34
User Badges:

hi edison,


Thanks , if i am not wrong , sfp modul for 7206 is available so LC To SC i can connect to my 3550 switch.


still confused about the VLAN config. for 7206 . if u have any URL to study can you please send me that.


Thanks in Advance

Edison Ortiz Tue, 05/27/2008 - 13:22
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

You don't configure Vlans in the 7206. You are using a routed port which connects directly to the 3550.


The 7206 should have a copper port, does it not? You only have a fiber port in the 7206? That's very strange.



Actions

This Discussion