05-26-2008 07:25 PM - edited 03-15-2019 10:53 AM
Hi I need register a Third-Party SCCP Video Endpoints, specific the Sony PCS-1, which is compatible with the SCCP protocol. My doubt is How I can add it? I have the Cisco Call Manager Version 6.
05-27-2008 04:58 AM
A third party SCCP video endpoints is equivalent to that model of the cisco ip phone configuration?
05-27-2008 10:37 PM
Hi,
You need to have the sccp firmware running on the PCS-1 and the license.
Then you need to install the coppackage on the callmanager and you can then select the PCS-1 as a device.
You can download the necesary firmware etc here : http://www.spireglobal.com/services-and-support/software-upgrades.asp#PCS1
Please rate the post if it was helpfull.
Kind Regards,
Jeroen
05-28-2008 11:09 AM
Hi jeroenhermans, thanks for answering my question. But I have another: for the SCCP Videoendpoints series Polycom VSX 5000, Polycom VSX 6000 and Polycom VSX 7000, where I can download the apropiate files to install the firmware in the Cisco Call Manager? Do you know where I can download these firmwares for these Polycom SCCP videoendpoints?
Thanks!!
05-28-2008 11:37 AM
Hi,
It is explained here : http://knowledgebase.polycom.com/kb/search.do?cmd=displayKC&docType=kc&externalId=11553&sliceId=SAL_PUBLIC_1_2&dialogID=6270244&stateId=1%200%206266544
Please rate my post if it was helpfull.
Kind Regards,
Jeroen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide