CCME and MTP

Unanswered Question
May 27th, 2008

Hello,

I have a question for CCME MTP configuration.

Does CCME supports MTP? And if it does, how to configure MTP for CCME?

I tried to configure it in same manner as transcoding resource.

Here is the output from show dspfarm all:

Dspfarm Profile Configuration

Profile ID = 2, Service = TRANSCODING, Resource ID = 2

Profile Description :

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 6

Number of Resource Available : 6

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Dspfarm Profile Configuration

Profile ID = 1, Service = MTP, Resource ID = 1

Profile Description :

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 6

Number of Resource Available : 6

Hardware Configured Resources : 6

Hardware Available Resources : 6

Software Resources : 0

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

Total number of DSPFARM DSP channel(s) 12

------------------------------------------

show sdspfarm units

mtp-1 Device:mtpXXXXXXXXXX TCP socket:[-1] UNREGISTERED

actual_stream:0 max_stream 0 IP:0.0.0.0 0 Unknown 0 keepalive 0

--------------------------------

What is the reason MTP profile to be in "ASSOCIATION IN PROGRESS" status?

---------------------------------------

The main configuration is:

sccp local GigabitEthernetXXXX

sccp ccm 10.N.N.N identifier 1

sccp

!

sccp ccm group 1

bind interface GigabitEthernetXXXX

associate ccm 1 priority 1

associate profile 2 register tcxXXXXXXXXXXXX

associate profile 1 register mtpXXXXXXXXXXXX

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 6

associate application SCCP

!

dspfarm profile 1 mtp

codec g711ulaw

maximum sessions hardware 6

associate application SCCP

-------------------------------

Thank you,

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mciarfello Sun, 06/01/2008 - 19:53

You need SDSPFARM commands under telephony-service.

sdspfarm units x

sdspfarm transcode sessions y

sdspfarm tag 1 mtpxxxxxxxxx (mac address)

sdspfarm tag 2 tcxxxxxxxxxx (mac address)

Actions

This Discussion