cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1053
Views
0
Helpful
1
Replies

CCME and MTP

sistefanov
Level 1
Level 1

Hello,

I have a question for CCME MTP configuration.

Does CCME supports MTP? And if it does, how to configure MTP for CCME?

I tried to configure it in same manner as transcoding resource.

Here is the output from show dspfarm all:

Dspfarm Profile Configuration

Profile ID = 2, Service = TRANSCODING, Resource ID = 2

Profile Description :

Profile Admin State : UP

Profile Operation State : ACTIVE

Application : SCCP Status : ASSOCIATED

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 6

Number of Resource Available : 6

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

Codec : g711alaw, Maximum Packetization Period : 30

Codec : g729ar8, Maximum Packetization Period : 60

Codec : g729abr8, Maximum Packetization Period : 60

Dspfarm Profile Configuration

Profile ID = 1, Service = MTP, Resource ID = 1

Profile Description :

Profile Admin State : UP

Profile Operation State : RESOURCE ALLOCATED

Application : SCCP Status : ASSOCIATION IN PROGRESS

Resource Provider : FLEX_DSPRM Status : UP

Number of Resource Configured : 6

Number of Resource Available : 6

Hardware Configured Resources : 6

Hardware Available Resources : 6

Software Resources : 0

Codec Configuration

Codec : g711ulaw, Maximum Packetization Period : 30

SLOT DSP VERSION STATUS CHNL USE TYPE RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE mtp 1 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 1 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

0 2 9.2.3 UP N/A FREE xcode 2 - - -

Total number of DSPFARM DSP channel(s) 12

------------------------------------------

show sdspfarm units

mtp-1 Device:mtpXXXXXXXXXX TCP socket:[-1] UNREGISTERED

actual_stream:0 max_stream 0 IP:0.0.0.0 0 Unknown 0 keepalive 0

--------------------------------

What is the reason MTP profile to be in "ASSOCIATION IN PROGRESS" status?

---------------------------------------

The main configuration is:

sccp local GigabitEthernetXXXX

sccp ccm 10.N.N.N identifier 1

sccp

!

sccp ccm group 1

bind interface GigabitEthernetXXXX

associate ccm 1 priority 1

associate profile 2 register tcxXXXXXXXXXXXX

associate profile 1 register mtpXXXXXXXXXXXX

!

dspfarm profile 2 transcode

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

maximum sessions 6

associate application SCCP

!

dspfarm profile 1 mtp

codec g711ulaw

maximum sessions hardware 6

associate application SCCP

-------------------------------

Thank you,

1 Reply 1

mciarfello
Level 4
Level 4

You need SDSPFARM commands under telephony-service.

sdspfarm units x

sdspfarm transcode sessions y

sdspfarm tag 1 mtpxxxxxxxxx (mac address)

sdspfarm tag 2 tcxxxxxxxxxx (mac address)

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: