cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
557
Views
0
Helpful
17
Replies

Upgraded 5.1.3

Hello I have two CCM 5.1.3 PUB and Sub. I need to upgraded to cisco-ipt-k9-patch5.1.3.3000-5.tar.gz.sgn anyone tell me step-to- step how to do the upgraded.

Thanks.

1 Accepted Solution

Accepted Solutions

go thru the Release Notes for the upgrade you plan to apply, all the upgraded components are listed there

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

17 Replies 17

Jaime Valencia
Cisco Employee
Cisco Employee

OS Admin -> Software upgrades -> install/upgrade

fill in info and follow wizard.

install on both servers, AND DO NOT REBOOT UNTIL BOTH HAVE THE PATCH

once both have the patch proceed with the reboot and switch partitions

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Hello Tkanks for reply, if I have in both the same patch how apply the reboot, which reboot first.

pub, then subs

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

this are not specific instructions for that but apply to any patch you want to apply:

Upgrading from Unified CM 5.x to Unified CM 6.x

The 1:1 redundancy scheme enables you to upgrade the cluster using the following method:

Step 1 Install the new version of Unified CM on the publisher. Do not reboot.

Step 2 Install the new version of Unified CM on all subscribers simultaneously. Do not reboot.

Step 3 Reboot only the publisher. Switch to the new version of Unified CM and allow some time for the database to initialize.

Step 4 Reboot the TFTP server(s) one at a time. Switch to the new version of Unified CM and wait for the configuration files to be rebuilt before upgrading any further servers in the cluster.

Step 5 Reboot the dedicated music on hold (MoH) server(s) one at a time. Switch to the new version of Unified CM.

Step 6 Reboot the backup subscriber(s) one at a time. Switch to the new version of Unified CM. This step might impact some users if 50/50 load balancing is implemented.

Step 7 Fail-over the devices from the primary subscribers to their backups.

Step 8 Reboot the primary subscriber(s) one at a time. Switch to the new version of Unified CM.

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thanks for reply I have one question.

Do you said "Reboot the primary subscriber(s) one at a time. Switch to the new version of Unified CM. "

To do the correct process I have to do this :

From the Cisco Unified Communications Operating System Administration window, navigate to

Restart>Switch Versions.

Switch Versions and Restart

Is the same that you said in your steps above?

yes, that's it

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thanks for reply I have only two servers, how many time do I have wait after reset PUB and TFTP that is the same server to reset the Sub?

Thanks.

until they fully come back, as mentioned in the instructions

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thanks for reply I need to know if this upgraded can change o eliminate my backgroung of the phone already that are in my tftp.

I need that this continue work.

-

FTP:Desktops/320x196x4/BB80.png" URL="TFTP:Desktops/320x196x4/BB320.png" />

FTP:Desktops/320x196x4/BBTC80.png" URL="TFTP:Desktops/320x196x4/BBTC320.png" />

I need that this continue work

Thanks for reply I need to know if this upgraded can change o eliminate my backgroung of the phone already that are in my tftp.

I need that this continue work.

-

FTP:Desktops/320x196x4/BB80.png" URL="TFTP:Desktops/320x196x4/BB320.png" />

FTP:Desktops/320x196x4/BBTC80.png" URL="TFTP:Desktops/320x196x4/BBTC320.png" />

I need that this continue work

You will need to upload them again after the upgrade

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thanks for reply .

Can you tell me how to do this step to step?

I have only the list.xml and image in the format correct.

look this on CCO

ip phone administration guide + background

select the doc for the phone model you will be using and look for the section on customizing the phone, follow instructions

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

hello thanks for reply a one question more.

I need to know if the upgraded includes firmware to ip phones.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: