distrubute only two subnets BGP into OSPF

Unanswered Question
May 27th, 2008

I have an edge router that I want to distribute only two subnets into ospf.

Can I do this by allowing only those two subnets from BGP, or do I need to filter what gets into OSPF?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
droehsler Tue, 05/27/2008 - 10:01


You can do it either way using a route map. You can filter your BGP neighbor on the incoming routes or redistribute into OSPF using a route map to filter. Cisco recommends against redistributing from BGP into an IGP but if there is a filter it should be ok.



This Discussion