pri-group command not available

Unanswered Question
May 27th, 2008
User Badges:

Hi,


I would like to know why the pri-group command is not available under the controller xx submenu of my 2600XM router. It is running the following IOS c2600-advipservicesk9-mz.123-26.bin and have a VWIC-1MFT-G703 card.


Thanks a lot for your help.




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Tue, 05/27/2008 - 13:03
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, for data only pri on the vwic, you can try with an non-voice image, else the recommended card is nm-xce1/t1.

atosorigin Tue, 05/27/2008 - 13:13
User Badges:

I tried first with a ipbase image but I've got the same result. Moreover the pri-group command is available with the same card on 1841 platform.

paolo bevilacqua Tue, 05/27/2008 - 13:42
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

The 1841 is very different. On the 2600 the only way to have data pri is the nm mentioned, or a the vwic in a nm-hdv with codecs.



Actions

This Discussion