05-27-2008 01:55 PM - edited 03-15-2019 10:54 AM
I have internal extension 87xx on my headoffice ,and my FXO number is 5313884.which is connection plan to my 8712.
My remote branch CCME has PRI and internal extension number is 3xxx.
I have created my translation rule on my bracnch office CCME is
voice translation-rule 100
rule 1 /\(^8712\)/ /215313884\1/ 0r rule 1 /\(^8712\)/ /5313884\1/
voice translation-profile 1
translate calling 100
ephone-dn 8
number 3333
translation-profile outgoing 1
When I tired to dial 8712 from my branch office to head office after pressing 9. Call can not be land on my headoffice internal extension 8712.
Could you plz solve my problem.
As I am trying to use 4 digit internal extension numbers on both sides ( headoffice and Remote branch)
Headoffice 87xx
Branchoffice 3xxx
I wanted to dial only four digit on my remote branch so headoffice internal extansion should ring.
I am using PSTN no WAN , CCM on headoffice and CCME on branch.
Solved! Go to Solution.
05-27-2008 03:29 PM
Hi, you need translate called, not calling.
05-27-2008 03:29 PM
Hi, you need translate called, not calling.
05-27-2008 05:08 PM
thanks p.beviacqua.
i have one more query when i dial digits its take delay , after some delay i recive dial tone and call land after some delay , could u plz help me out, is it a digit manipulation delay ? how can i resolve my problem
05-28-2008 01:35 PM
Do you have T in destination-pattern ?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: