cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
494
Views
5
Helpful
4
Replies

CCM and IPPHone in different VLAN : is it possible

connect101
Level 1
Level 1

Hello,

I want to use different VLAN with my Call Manager and my IPPhone.

In the catalyst, define voice vlan for my ipphone,

in the router I define the sub-interface for the CUCM and for the Voice VLAN.

Is it possible that phone can function ?

Thks

Is it possible?

1 Accepted Solution

Accepted Solutions

yes, here you have some info

How to configure a Catalyst switch port to connect to a Cisco IP phone

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K33524366

Voice VLANs and IP phone support on Catalyst switches

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K14820688

How to configure a Voice-over-IP (VoIP) network on the Cisco Catalyst 6500 series switches

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K16958673

The config is known as Router on a stick since the router is the one that takes care of the inter-vlan routing

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

View solution in original post

4 Replies 4

Jaime Valencia
Cisco Employee
Cisco Employee

yes it's possible. all you care about is the proper routing is in place to have connectivity between the CUCM server and the phone

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thank you very much,

If i understand, if an office have voice VLAN.

I define switchport voice vlan in the catalyst,

After, I define a trunk with the command switchport voice vlan,

After, I connect this trunk in my router,

And in my router there is a vlan interface for the voice vlan, and there is another interface for CUCM VLAN.

Is it like that ?

yes, here you have some info

How to configure a Catalyst switch port to connect to a Cisco IP phone

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K33524366

Voice VLANs and IP phone support on Catalyst switches

http://www.ciscotaccc.com/kaidara-advisor/voice/showcase?case=K14820688

How to configure a Voice-over-IP (VoIP) network on the Cisco Catalyst 6500 series switches

http://www.ciscotaccc.com/kaidara-advisor/lanswitching/showcase?case=K16958673

The config is known as Router on a stick since the router is the one that takes care of the inter-vlan routing

HTH

javalenc

if this helps, please rate

HTH

java

if this helps, please rate

Thank you,

And about the VLAN,

I've asked in this forum about the audio ip address in the softphone, but no response yet.

Can you explain about the audio ip address?

How to use the audio ip address in the ipcommunicator.

Can I use the VLAN Voice with the Softphone.

'cause i've already tagged my port with switchport voice vlan.

thank you

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: