Does a reload / reset of a CUE module involve rebooting the router ( 2851 )hosting it. And one more thing, do we need a separate backup nbefore reloading / rebooting the module. Think " copy run start" should suffice..
You are very welcome!
The main difference between the 7940G/7960G and the 7941G/7961G are the "backlit" line keys and upgraded displays that are on the newer 7941G/7961G and not on the 7940G/7960G. There are some new features with Unity and CCM that are only supported on the 41/41/45 .. 61/62/65 models as well. We have many of all 4 models deployed in our environment and our users much ** prefer the 41G/61G models. Have a look;
The Cisco Unified IP Phone 7941G provides two programmable backlit line/feature buttons (these line keys now change color depending on the status of the call ie: Ringing,Hold,Idle **Very nice feature**) and four interactive soft keys that guide a user through call features and functions, and audio controls for high-quality duplex speakerphone, handset, and headset. A built-in headset port and an integrated Ethernet switch are standard with the Cisco Unified IP Phone 7941G. The phone also features a ***best-of-class large, higher-resolution grayscale pixel-based LCD ***. The display provides features such as date and time, calling party name, calling party number, and digits dialed. The graphic capability of the display allows for the inclusion of higher value, more visibly rich Extensible Markup Language (XML) applications and double-byte languages.
From this doc;
The Cisco Unified IP Phone 7940G provides two programmable line and feature keys (**not backlit**), plus a high-quality speakerphone. It also has four dynamic soft keys that guide users through call features and functions. A built-in headset port and an integrated Ethernet switch are standard with the Cisco Unified IP Phone 7940G. The phone also includes audio controls for the full-duplex speakerphone, handset, and headset. This phone also features a large, pixel-based LCD display that provides information such as date and time, calling party name, calling party number, and digits dialed.
From this doc;
Hope this helps! Have a great weekend as well (no work if possible ;-)
I think I see where you are going with this :) One note here is that AvT is just the replacement name for what was formerly known as GMS. The format must be as shown below (G.711 u-law, 8 kHz, 8 bit, Mono);
Cisco Unity Express Release 2.1 introduces a number of important features and enhancements, including the following:
â¢Administration Via Telephone
Cisco Unity Express Release 2.1 introduces the ***Administration Via Telephone (AVT), previously known as the Greeting Management System (GMS). The ability for an administrator, or other privileged user, to create and address broadcast messages is added to this Telephony User Interface (TUI) based management tool in Release 2.1. Also new with Release 2.1 is the ability to add recorded names and locations to the Unity Express local directory for easier addressing of messages to remote users. Administrators also use the AVT to record and manage Cisco Unity Express automated attendant prompts and alternate greetings for the automated attendant.
Recording an Auto-Attendant Greeting or Prompt File
Two methods are available to create auto-attendant greeting and prompt files:
â¢Create a.wav file with the following format: G.711 u-law, 8 kHz, 8 bit, Mono. The file cannot be larger than 1 MB (about 2 minutes). After recording the greeting, use the GUI or Cisco Unity Express CLI ccn copy url command to copy the file in to the Cisco Unity Express system. See the next section, "Uploading the Auto-Attendant Greeting or Prompt File," for the upload procedure.
â¢Use the AvT on the TUI to record the greeting or prompt. Dial the AvT telephone number and select the option to record a greeting. When finished recording, save the file. AvT automatically saves the file in Cisco Unity Express.
The AvT prompt filename has the format UserPrompt_DateTime.wav, for example: UserPrompt_11152003144055.wav. You may want to use CLI commands or GUI options to rename the file with a meaningful name.
Cisco recommends using the AvT on the TUI to record greetings and prompts because the AvT provides higher sound quality compared to .wav files recorded using other methods.
From this doc;
AVT & Triggers;
Hope this helps my friend!
Life is good! Just had a whole week off on vacation (sweet!) I have to be honest, I'm not sure about your first question :( For # 2
Try Adobe Audition. Here is a link, it's very,very good :)
Hope this helps! Take care,