05-28-2008 12:02 PM - edited 03-10-2019 03:52 PM
Hi
currently we have configured tacacs+ server for controlling access for all routers and switches.we are going to add few more devices into our server in US office before adding this we need to ensure about the redundancy ,high availability of server.Currently we have only one server configured with user and group name sure we will
replicate the same in another server that will be acted like backup when primary Tacacs fails.
Please help me the commands and configuration we need to configure in all devices to contact our new secondary tacacs server when primary fails.
Thanks
karthick
05-28-2008 12:21 PM
On IOS device you just need to add one more tacacs server. First on the list would be primary and if there is no response from primary tacacs , it will fwd request to next listed tacacs server.
This is how you add tacacs on IOS device
Router(config)#tacacs-server host x.x.x.x key cisco
Router(config)#tacacs-server host y.y.y.y key cisco
Regards,
~JG
Do rate helpful posts
05-30-2008 02:29 AM
Thank you very much ...
I will it and update ..
thanks
karthick
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: