Digit strip over MPLS Sip Trunks?

Unanswered Question
May 28th, 2008

I have a CCM6 server behind a 2821 router connected to an MPLS network. The MPLS link is configured for SIP trunks. If the Telco is forwarding 10 digits down the SIP trunks to CCM, is there a way to strip that down to 4?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gmgarrian Thu, 05/29/2008 - 07:44

We actually resolved this by adjusting the significant digits setting for the SIP trunk in CCM.

Thanks for the link, I've used that before in CME systems. Pretty good except for the 15 entries per rule limit, though I did find a quick-n-dirty work around.


This Discussion