05-28-2008 11:20 PM - edited 03-13-2019 05:17 PM
Hello, I'm not being able to find a clear voice and voip dialpeer configuration examples for the cisco 2800 router. Can somebody help please ?
05-29-2008 12:16 PM
Hi friend,
This may be helpful if you don't have it yet:
http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/dial_peer/dp_app_a.html
Also this is to review matching dial-peers:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml
Regards,
- adrián.
05-29-2008 01:18 PM
Thank you very much, I'm starting to get it. I'll post results when done. Thanks.
05-29-2008 04:55 PM
This is helpful. Just some quick question from a newbie.
I'm just studying to interconnect 2 far-apart legacy PBXs using 2801 routers and Internet as shown below:
PBX <-> 2801 R <-> WWW <-> 2801 R <-> PBX
My idea is to allow users from both PBX to call each other using 4-digit dialing. Assuming I have the right IOS and VWIC on the routers, do I still need to install CallManager Express plus license?
Thanks.
05-29-2008 05:47 PM
No, anyway CME is embedded in IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide