Stub Multicast Router on ASA

Answered Question
May 29th, 2008

Hi,

I'm swapping out a PIX, IOS 6.3 with an ASA 5520 v8. The PIX has the following 2 commands in it's config:

multicast interface outside

multicast interface inside

These commands do not exist on the ASA. I do not wish to enable multicast routing. What commands on the ASA are equivalent to the multicast commands on the PIX?

Thanks

Yolande

I have this problem too.
0 votes
Correct Answer by Syed Iftekhar Ahmed about 8 years 6 months ago

hostname(config-if)#igmp

hostname(config-if)#igmp forward interface outside

This will enable the inside interface for IGMP forwarding and configure

all multicast requests coming from the inside interface and forward them

to the outside.

This should be it, remember to remove all your PIM configurations as PIM

and IGMP Stub Multicast Routing are not simultaneously supported.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Syed Iftekhar Ahmed Thu, 05/29/2008 - 11:47

hostname(config-if)#igmp

hostname(config-if)#igmp forward interface outside

This will enable the inside interface for IGMP forwarding and configure

all multicast requests coming from the inside interface and forward them

to the outside.

This should be it, remember to remove all your PIM configurations as PIM

and IGMP Stub Multicast Routing are not simultaneously supported.

Actions

This Discussion