05-29-2008 07:09 AM - edited 07-03-2021 03:56 PM
Hello:
If I am using TACACS with WCS, is ACS a necessity for the security server or could I use other equipment to work?
Thank you very much
Nacho Montoya
05-29-2008 08:48 AM
If you want to authenticate to a radius server, then you can use IAS or any other radius server if you want. For WLC's you check the management user in the radius server.
05-29-2008 09:46 AM
I have explain bad. I only want to know if when I am using a server with TACACS in a WCS enviroment, this server must to be an ACS or it could be a non-Cisco server.
Thank you
Regards
Nacho Montoya
05-29-2008 03:10 PM
You mean if you are using a server with TACACS in a LWAPP environment? WCS and the WLC's is authenticating to TACACS. You don't need ACS, but you need a radius server that supports TACACS. Hope this ansewers your questions.
05-30-2008 06:29 AM
Thank you very much. This solves my question.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: