Dial-peer as53350 and GW 2800

Unanswered Question
May 29th, 2008
User Badges:

I have the follow network diagram

I need the call start whit 909T going to Claro E1, but when call to 9T the call go to 2811 GW, for de PSTN E1

The configuration to as5350 and gw 2800 is:

AS5350 (

dial-peer voice 1 pots

tone ringback alert-no-PI

description ***E1 Claro***

answer-address 1700

destination-pattern 909T


port 3/0:D


dial-peer voice 2 voip

answer-address 1700

description ***GW 2800***

destination-pattern 9T

voice-class codec 1

session target ipv4:

dtmf-relay cisco-rtp


GW 2800 (

dial-peer voice 10 pots

tone ringback alert-no-PI

description ***LOCALES***

destination-pattern 9T


port 1/0/0:15


When the 1700 call to 92442010 for example the calling match whit the dial-peer but the call it's incoming, and the call never go to GW2800

But when i make csim start 92442010 the call match to the dial-peer but outgoing call and call it recived but GW2800.

attach the network diagram and debug calls.

Thanks, sorry for the english.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion