VG224 Not Resgistering Completly with CUCM 6.1

Unanswered Question
May 29th, 2008

Can anyone tell me what does this mean?

I have several VG224 registered using SCCP to a CUCM 6.1, everything is working however im still getting this error in the CUCM.

AutoCfg_Virtual_Endpoint Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED

Active Call Manager: 172.26.224.11, Port Number: 2000

TCP Link Status: NOT_CONNECTED, Device Name: AN1E4A5390D9FFF

Reported Max Streams: 0, Reported Max OOS Streams: 0

Supported Codec: g711ulaw, Maximum Packetization Period: 20

In the RTMT i get the following msg.

CCM_CALLMANAGER-CALLMANAGER-3-DeviceTransientConnection : Transient connection attempt. Device IP address. [String] Device name [Optional]. [String] Device MAC address [Optional]. [String] Protocol. [String] Device type. [Optional] [Enum]Reason Code [Optional]. [Enum]Connecting Port [UInt] Registering SIP User. [Optional]. [String]

SCCP_GATEWAY_VIRTUAL_PHONE -- AuthenticationError

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ivillagomez Fri, 05/30/2008 - 05:46

Exactly, not all ports are configured in the CCM as i dont need to use them right now, is this the reason im getting this error?

Actions

This Discussion