How to setup SIP and H.323 test lab?

jong_r0602 · ‎05-29-2008

Hi,

Appreciate if anyone can help me how to setup a sip/h323 trunking lab. Im having a hardtime in configuring my router and pix 722. My current setup is PBX-router-pix-router. I want to build a test lab first then if is success, ill setup this for production.

Thanks

paolo bevilacqua · ‎05-29-2008

Do you have set a proper gre tunnel across routers ?

That will make everything easier. PIXs and FWs are a problem for voip so it's better to use tunnel whenever possible and the will be be unable to disrupt traffic as usually happens otherwise.

jong_r0602 · ‎05-29-2008

Hi,

i dont have a gre tunnel rightnow, appreciate if you can help me also to setup a gre tunnel across my routers.

Thanks for your response,

-jong

rzanett · ‎05-30-2008

There are many examples on cisco.com. Here are some:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008023ce5b.shtml

http://www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a008011520d.shtml

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00800946b8.shtml

Cheers,

jong_r0602 · ‎06-02-2008

Thanks guys to your help, im now starting to build my test lab. I'll post my question immediately if any.

- jong

jong_r0602 · ‎06-03-2008

Hi,

How about my dial-peer config for sip and h.323. Do i need an extra config for my PIX also?

Thanks,

Jong