05-29-2008 04:01 PM
Hi,
Appreciate if anyone can help me how to setup a sip/h323 trunking lab. Im having a hardtime in configuring my router and pix 722. My current setup is PBX-router-pix-router. I want to build a test lab first then if is success, ill setup this for production.
Thanks
05-29-2008 05:32 PM
Do you have set a proper gre tunnel across routers ?
That will make everything easier. PIXs and FWs are a problem for voip so it's better to use tunnel whenever possible and the will be be unable to disrupt traffic as usually happens otherwise.
05-29-2008 10:45 PM
Hi,
i dont have a gre tunnel rightnow, appreciate if you can help me also to setup a gre tunnel across my routers.
Thanks for your response,
-jong
05-30-2008 04:54 AM
There are many examples on cisco.com. Here are some:
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008023ce5b.shtml
http://www.cisco.com/en/US/tech/tk86/tk89/technologies_configuration_example09186a008011520d.shtml
http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00800946b8.shtml
Cheers,
06-02-2008 06:01 PM
Thanks guys to your help, im now starting to build my test lab. I'll post my question immediately if any.
- jong
06-03-2008 06:33 PM
Hi,
How about my dial-peer config for sip and h.323. Do i need an extra config for my PIX also?
Thanks,
Jong
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide