MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Routers

Unanswered Question

We have a discussion with eHealth via partners to view the QoS traffic on the routers. They stated that we should activate the MIB variable on the router. Therefore, can someone tell me if the MIB CISCO-CLASS-BASED-QOS-MIB is supported on all Cisco Routers?

Or can it be activated? This MIB tree starts at OID



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)

The mib locater indicates that the mib tree exists on the router but a snmpwalk give no result:

Met OID .


bash-2.05$ ./GetTable2.pl

No results found for with ***


output of show version:

Cisco IOS Software, s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version 12.2(33)SXH, RELEASE SOFTWARE (fc5)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Sun 19-Aug-07 07:38 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)

nabxpr01 uptime is 28 weeks, 1 day, 20 hours, 37 minutes

Uptime for this control processor is 28 weeks, 1 day, 20 hours, 42 minutes

Time since nabxpr01 switched to active is 28 weeks, 1 day, 20 hours, 40 minutes

System returned to ROM by reload at 09:47:37 UTC Wed Aug 22 2007 (SP by reload)

System restarted at 15:48:44 GMT+1 Wed Nov 14 2007

System image file is "bootdisk:s72033-advipservicesk9_wan-mz.122-33.SXH.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:


If you require further assistance please contact us by sending email to

[email protected].

cisco WS-C6509-E (R7000) processor (revision 1.4) with 458720K/65536K bytes of memory.

Processor board ID SMC11250066

SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache

Last reset from s/w reset

1 Virtual Ethernet interface

50 Gigabit Ethernet interfaces

16 Ten Gigabit Ethernet interfaces

1917K bytes of non-volatile configuration memory.

8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

yjdabear Fri, 05/30/2008 - 06:00

Try snmpwalking directly. This is cbQosCMPostPolicyByte64 that eHealth's QoS module uses to calculate "Post-Policy Throughput". It should be populated.


This Discussion