05-30-2008 01:17 AM - edited 03-11-2019 05:52 AM
Hi,
We are wanting to provide broadband services to customers on site, but keep it separate from our main internet pipe for the business.
I am wondering if we could use a Cisco ASA and make use of the PPPoE client ?
My idea is to use a different sub-interface to connect to each ADSL modem, using a separate PPPoE client instance to obtain IP etc. I would then like to use different sub-interfaces on the inside on which the customer networks will sit. I would then use NAT overload onto the PPPoE interface for each "inside" customer vlan to provide internet access.
Is this possible ? or am I barking up the wrong tree ? As I mentioned previously, we are wanting to add addition ADSL lines as more customers come on board.
Or is there another device out there that can do what we are wanting at low cost ?
06-02-2008 04:00 AM
Can anyone provide any advice ?
11-09-2013 11:45 AM
I know this works on a Cisco ISR Router
Just tested it
Nigel
11-14-2013 06:42 AM
This works for on the ASA, the device works as a PPPoE client:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080ab7ce9.shtml
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide