Line ID presentation

Unanswered Question
May 30th, 2008
User Badges:

First, thanks in advance for any help!

I'm using CCM 4.2. How can I get the members of a line group phones to display the dn forwarded to the hunt pilot instead of calling party's id? Right now they can't distinguish among incoming calls and would like to know which calls are being extended via the hunt. I've only been working w/this about 1 yr and have much to learn. Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (2 ratings)
Loading.
Avner Izhar Sat, 05/31/2008 - 20:52
User Badges:
  • Bronze, 100 points or more

Hi,


The hunt will not change things, something else is needed.


you can add a directory number to the path, and have it CFA to the hunt pilot, then the phones will display the redirecting number (make sure it is enabled and that you have a name on that DN).


HTH, Avner.

feisalb Tue, 06/03/2008 - 07:50
User Badges:

Hello All,


Change the hunt pilot number to something else,

then create a cti route point with the original hunt pilot DN. Forward all calls on the cti rp to the new hunt pilot DN. The alerting name for

the cti rp will display on the line group members.

Rate this post if it helps.

feisalb Tue, 06/03/2008 - 07:50
User Badges:

Hello All,


Change the hunt pilot number to something else,

then create a cti route point with the original hunt pilot DN. Forward all calls on the cti rp to the new hunt pilot DN. The alerting name for

the cti rp will display on the line group members.

Rate this post if it helps.

Googi1974 Tue, 07/08/2008 - 15:21
User Badges:

Thanks to you all - I did create the route point and I also needed to check "Redirected Number" in the Forwarded Call Information Display of the line.

Actions

This Discussion