connection between 2800 wireless lan controller module and LAN switch

Unanswered Question
May 30th, 2008

Is it correct that 2800 GigE port is dot1q trunk and LAN switch is "switchport mode trunk"?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Scott Fella Fri, 05/30/2008 - 16:36

Yes.... the link between any WLC and switchport must be an 802.1q trunk.

craigvoice Sat, 05/31/2008 - 21:26

Thanks. How about the lightweight APs? Do they need to be trunk ports to all vlans or access port to only AP DHCP vlan?

Scott Fella Sun, 06/01/2008 - 05:07

The LAP's should be placed on an access port on a management vlan, but really can be placed anywhere. If they will be on the same Subnet as the WLC then try to have no more than 40. If the LAP's will be on a different subnet, then 60 - 100 LAP's per subnet is best practice.

Actions

This Discussion