cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
899
Views
0
Helpful
3
Replies

Cannot configure codec g729a & g729ab in Cisco AS5350XM

noxkrugger
Level 1
Level 1

Why I cannot configure the codec g729a & g729ab at dial-peer voice or voice codec class in AS5350XM.

I noticed in the datasheet in this link for IP-IP GW,

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps5640/product_data_sheet09186a00801da698.html

all codec for G729 are supported.

1 Accepted Solution

Accepted Solutions

In some models you configure that under voice-cards. Others support flexi complexity and it's all automatic. You are never presented the choice of annex a or not with cisco gateways.

However, if you're using SIP, there are special cases:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcodec.html

As an appreciation to those providing answers, please rate useful posts with the scrollbox below!

View solution in original post

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Hi, g.729a is an alternative algorithm and doesn't change compressed format, so is compatible and transparent for use with a non-a endpoint.

You choose which one is actually used with "codec complexity".

G.729b is the variation with embedded vad and would run as g.729ab depending on the codec complexity as above.

Hope this helps, please rate post if it does!

What do u mean by codec compelxity? I cannot choose or configured any of that either high or medium in the voice gateway. How to achieve that?

In some models you configure that under voice-cards. Others support flexi complexity and it's all automatic. You are never presented the choice of annex a or not with cisco gateways.

However, if you're using SIP, there are special cases:

http://www.cisco.com/en/US/docs/ios/12_2t/12_2t11/feature/guide/ftcodec.html

As an appreciation to those providing answers, please rate useful posts with the scrollbox below!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: