Hi, Thanks for that Information, do you know about the aironet 1252?? As I can only see reference to 1240

What exactly are you looking for?

Here is a link to the 1252's:

http://www.cisco.com/en/US/products/ps6973/index.html

Hi

I have search that site already looking to see if the 1252 support HREAP without luck, do you know if they do support it?

As far as I would imagine - it should support it, as longs as it's LWAPP and not autonomous. The only difference I can see on the 1252 is the N radio. However you could ask your cisco reseller to confirm?

HTH.

Hi Mark,

Here is a note to add to the great help from Scott and Andrew. These are the latest H-REAP requirements;

Requirements

H-REAP is only supported on the 1130AG, 1240AG and **1250 access points and on the Cisco 2000, 2100 and 4400 Series Unified Controllers, the Catalyst 3750G Integrated Wireless LAN Controller Switch, the Cisco WiSM, and the **Controller Network Module for Integrated Services Routers.

From this excellent doc;

H-Reap Design and Deployment Guide

http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml

Hope this helps!

Rob

Thanks Rob, thats exactly what I was looking for!