VG224 248 Analogue Phone Star services

Answered Question
Jun 4th, 2008

Does anyone know a URL that lists all the star services that are available when connecting an anologue phone to a VG224, VG248 or ATA voice port.

example: *21 = call forward

many thanks

Correct Answer by Rob Huffman about 8 years 8 months ago

Hi Phil,

Good stuff! I almost got carpal tunnel syndrome putting this together (hahaha!)

Take care,


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Rob Huffman Wed, 06/04/2008 - 04:49

Hi Philip,

I have not seen a nice doc like that here (is there ever something nice and easy :) Here is the compiled list as I have found;

The default settings for the VG248 feature codes are as follows:

Hang up last call #1

Transfer #2

Conference #3

Drop Last Conference Party #4

Forward all to voice mail **0

Call forward all **1

Cancel call forward **2

Pickup **3

Group Pickup **4

Redial *#

Malicious Call Identification ***

SpeedDial Voicemail *0

SpeedDial 1 *1

SpeedDial 2 *2

SpeedDial 3 *3

SpeedDial 4 *4

SpeedDial 5 *5

SpeedDial 6 *6

SpeedDial 7 *7

SpeedDial 8 *8

SpeedDial 9 *9

The default settings for the VG224 feature codes are as follows:

Call Forward All (CFA) **1

Call Forward All Cancel **2

Call Park Directed Call Pickup Directed **6

Call Pickup Group **4

Call Pickup Local **3

Call Transfer = Hookflash

Redial *#

Speed Dial *01 to *99 for two-digit codes

Speed Dial to Voice Mail Default prefix and code is *0 for one-digit codes, and *00 for two-digit codes

Hope this helps!


phibarry Wed, 06/04/2008 - 05:10

this looks just the ticket, much appreciated

very best Regards


Correct Answer
Rob Huffman Wed, 06/04/2008 - 05:28

Hi Phil,

Good stuff! I almost got carpal tunnel syndrome putting this together (hahaha!)

Take care,


tlwoodstx Tue, 04/16/2013 - 16:19

Rob, long time fan of your posts. I realize this thread is very old.  Any way to fully disable those FAC on a VG224.  Scenario: We have our VG units for analog lines to our patient rooms.  We constantly have patients accidently setting the lines to CallFwd vmail.  Any ideas how to stop this.

tlwoodstx Tue, 04/16/2013 - 16:27

Found in the doc referenced above. 

no stcapp feature access-code


This Discussion