06-04-2008 06:14 AM - edited 03-05-2019 11:25 PM
Hi all,
I have 4503 in my network and for the last 3 days its CPU utilization is touching almost 99%... No major changes have occured during the last 3. I have debugged a lot. Nothing unusual .. even restarted the entire switch but the problem persist. I have attached output of "sh processes cpu", "sh ver" as well. Any help please.
Regards,
Sheeraz
06-04-2008 06:33 AM
Hi, The "IP input" process has a high %, take a look at the next url, it may help you to find the problem:
http://www.cisco.com/en/US/products/hw/routers/ps359/products_tech_note09186a00801c2af3.shtml
Regards
Hope this helps, if so pls rate post
06-04-2008 10:29 PM
This sounds like a case of process switching. Can you get a 'show platform health'?
Also, check your SVIs for input drops. Are there a lot of input drops on one of the SVIs? If so, get a sniffer set up in that vlan and see what you can see. =)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: