06-04-2008 07:17 AM - edited 03-05-2019 11:25 PM
I've just upgraded my 6506 Supervisor engine (WS-SUP32-GE-3B) to s3223-ipservicesk9_wan-vz.122-18.sxf12.bin. After the initial start I try to do a wr or copy run start and I get a message that the system can not find the start-up config. Has anyone run into this? And how do I get this system back to normal?
06-05-2008 10:02 AM
Please post the show version output.
__
Edison.
06-08-2008 11:59 PM
Thanks for your help. I got it working , I erased NVRAM and restarted the switch and it recreated the file.
06-05-2008 10:47 AM
Where are you saving your startup config? This can happen if you, for example, tell the switch to boot from a config file on a flash disk and then the disk is removed.
Try using 'default boot config' and then a write mem...it would be advisable to back up the config first.
06-08-2008 11:59 PM
Thanks for your help. I got it working , I erased NVRAM and restarted the switch and it recreated the file.
06-05-2008 10:51 AM
Hi Edwin,
Please paste exact message along with "sh boot"
HTH
Raj
06-09-2008 12:00 AM
Thanks for your help. I got it working , I erased NVRAM and restarted the switch and it recreated the file.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide