Tx and Rx Diversity antenna

Answered Question
Jun 4th, 2008
User Badges:

Hi, I have received some new ap1231 with c1200-k9w7-mx.123-8jec IOS. I can't set anymore tx and rx antenna to Right(Primary) value. Do you know why?

Please take note that with the previous IOS was possible to do this.

Thanks a lot

Correct Answer by Rob Huffman about 9 years 1 month ago

Hi Roberto,


You are hitting this Bug;


These caveats are resolved in Cisco IOS Release 12.3(8)JEC1:


CSCsl17857


1231 access point running Cisco IOS Release 12.3(8)JEC is unable to set transmit/receive antenna options.


http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_3_8_JEC1rn.html#wp188929


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Wed, 06/04/2008 - 10:23
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Roberto,


You are hitting this Bug;


These caveats are resolved in Cisco IOS Release 12.3(8)JEC1:


CSCsl17857


1231 access point running Cisco IOS Release 12.3(8)JEC is unable to set transmit/receive antenna options.


http://www.cisco.com/en/US/docs/wireless/access_point/ios/release/notes/12_3_8_JEC1rn.html#wp188929


Hope this helps!

Rob

lonnylegrand99 Mon, 06/30/2008 - 06:02
User Badges:

Rob, does this include the problem with configuring an external antenna.


With previous 1232 AP's I've not had any problems configuring a 9dBi Hawking antenna on this ap. Now when I enter the information and hit save, it takes me to a 404 page. I've attached a couple of pdf's and a txt file showing the results.


I hope this fix addresses my issue as well.


Thank,


Lonny LeGrand



Rob Huffman Tue, 07/01/2008 - 06:17
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Lonny,


I don't think this bug is related to your issue as it is specific to the 1231. What exact IOS are you running so we can check this out.


Rob

lonnylegrand99 Thu, 07/10/2008 - 11:30
User Badges:

FYI, I'm updating this to inform all that the software upgrade resolved my issue with configuring an external antenna as well as the TX and RX issue.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode