Disable Aggressive Mode on a PIX running 6.3

Answered Question
Jun 4th, 2008

How can I turn off Aggressive mode on a PIX 501 running 6.3?

This is a security issue for our PCI compliance.

Correct Answer by Syed Iftekhar Ahmed about 8 years 8 months ago

You cannot disable aggressive mode in 6.3 code. PIX would try to initiate the connection first on Main mode and if it fails would try

aggressive mode.



Syed Iftekhar Ahmed

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Syed Iftekhar Ahmed Wed, 06/04/2008 - 11:12

You cannot disable aggressive mode in 6.3 code. PIX would try to initiate the connection first on Main mode and if it fails would try

aggressive mode.



Syed Iftekhar Ahmed

john.wittenberg Wed, 06/04/2008 - 11:19

Thank you for this information. I was afraid of that. Again thank you for your reply

John


grobinson23 Thu, 11/13/2008 - 08:25

In what version of the code can the disabling of aggressive mode be done?


Thanks!

Actions

This Discussion