cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1733
Views
5
Helpful
4
Replies

Disable Aggressive Mode on a PIX running 6.3

john.wittenberg
Level 1
Level 1

How can I turn off Aggressive mode on a PIX 501 running 6.3?

This is a security issue for our PCI compliance.

1 Accepted Solution

Accepted Solutions

You cannot disable aggressive mode in 6.3 code. PIX would try to initiate the connection first on Main mode and if it fails would try

aggressive mode.

Syed Iftekhar Ahmed

View solution in original post

4 Replies 4

You cannot disable aggressive mode in 6.3 code. PIX would try to initiate the connection first on Main mode and if it fails would try

aggressive mode.

Syed Iftekhar Ahmed

Thank you for this information. I was afraid of that. Again thank you for your reply

John

In what version of the code can the disabling of aggressive mode be done?

Thanks!

Hi,

7.0 and higher.

"isakmp am-disable"

http://www.cisco.com/en/US/docs/security/asa/asa70/command/reference/gl.html

Regards,

Arul

*Pls rate if it helps*

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: