Solved: Topology Services LMS 2.6

eliaspaulos · ‎06-04-2008

I have configure and deploy 10 1900 switch

all the same config only different ip/host name. 7 out of ten showing on topology services but not the other 3. I have run data collection almost 3 times but still not there. the devices track able every where except topology services neither on system defined nor user defined category. any help!! thanks in Advance!!

Joe Clarke · ‎06-04-2008

This really sounds like the bugs I described. Restarting Campus won't help. You need to upgrade to the fixed version.

View solution in original post

Joe Clarke · ‎06-04-2008

What version of Campus Manager? Please post a show ver from one of the 1900s not showing up.

eliaspaulos · ‎06-04-2008

campus manager 4.0.9 here is sh ver

Cisco Catalyst 1900/2820 Enterprise Edition Software

Version V9.00.04 written from 010.001.090.036

Copyright (c) Cisco Systems, Inc. 1993-1999

cs399-1L uptime is 2117day(s) 13hour(s) 19minute(s) 46second(s)

cisco Catalyst 1900 (486sxl) processor with 2048K/1024K bytes of memory

Hardware board revision is 5

Upgrade Status: No upgrade currently in progress.

Config File Status: No configuration upload/download is in progress

27 Fixed Ethernet/IEEE 802.3 interface(s)

Base Ethernet Address: 00-02-FD-DF-82-00

Joe Clarke · ‎06-04-2008

There are two bugs which could be causing this. Try upgrading to Common Services 3.0.6 and Campus Manager 4.0.11, and see if the problem persists.

eliaspaulos · ‎06-04-2008

is that possible to restart the process for topology services or restart campus manager?

looks like topology services not showing any

new devices added the last 2 days.

Joe Clarke · ‎06-04-2008

This really sounds like the bugs I described. Restarting Campus won't help. You need to upgrade to the fixed version.

Scelo · ‎07-01-2008

Hi Sir

I have a similar problem but with two device types. That's:

CiscoProducts 864 is shown instead of device type "Cisco 7600 S-Series"

ciscoProducts 822 instead of "CRS-1 Series 4"

This happens in Campus Manager Topology view, i'm running CM 4.0.10 in LMS 2.6 VERSION.

Could this mean i need to update to LMS 3.0?

eliaspaulos · ‎07-01-2008

upgrade to "Common Services 3.0.6 and Campus Manager 4.0.11" this is upgrade for LMS 2.6.

LMS 3.0 totally new version,my problem solved

by this upgrade pretty easy!!Good luck!

Scelo · ‎07-02-2008

Thanks! I upgraded CM4.0.10 ro CM4.0.11 and it is promising.

Can anyone tell me if "Cisco CRS-1 4-Slot Single-Shelf System" are manageable by LMS 2.6 or any other version of LMS.

Joe Clarke · ‎07-02-2008

LMS 2.6 does not manage CRS-1 devices. This device may be managed by LMS 3.0, but you will need to provide the sysObjectID for this device. You should start a new thread for that.

Scelo · ‎07-02-2008

I'm using CW LMS 2.6 with the following components:

CS 3.0.6

RME 4.0.6

CM 4.0.11

CV 6.1.5

IPM 2.6.0

At first LMS couldn't identify 7600s and CRS-1 4/s devices and after upgrading CM 4.0.10 the 7600s devices were identifiable.

Sh ver:

Cisco IOS XR Software, Version 3.5.3[Default]

ROM: System Bootstrap, Version 1.45(20070517:152402) [CRS-1 ROMMON],

CRS1-P01 uptime is 2 weeks, 5 days, 8 hours, 53 minutes

System image file is "disk0:hfr-os-mbi-3.5.3.CSCsm94907-1.0.0/mbihfr-rp.vm"

cisco CRS-4/S (7457) processor with 4194304K bytes of memory.

OID: 1.3.6.1.4.1.9.1.613

Hope this information helps.