06-05-2008 07:18 AM
The default color for ports that are not connected is red. I would like to change the color for red to be error disable and ports not connected to be some other color. What do I have to configure to change the colors?
06-05-2008 08:57 AM
The colors cannot be changed. They are hard-coded within CiscoView.
06-05-2008 09:07 AM
So how do I view through lms an error disabled port?
06-05-2008 10:56 AM
What device type?
06-05-2008 10:58 AM
3750 and 2960 switches
I am trying to configure a way to trap and capture error disabled ports.
06-05-2008 04:48 PM
Monitoring errdisable ports for these devices is not possible in CiscoView. However, depending on your IOS version, you may have built-in errdisable trap support. All you would need to do is enabling the sending of errdisable traps. For example:
snmp-server enable traps errdisable
The traps sent will be cErrDisableInterfaceEvent traps from the CISCO-ERR-DISABLE-MIB.
See http://www.cisco.com/en/US/tech/tk389/tk621/technologies_tech_note09186a00806cd87b.shtml for more on the errdisable detection and recovery feature.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: