06-05-2008 09:23 AM - edited 03-03-2019 10:14 PM
I am doing OC-12 configuration on 7600 series router. Can someone tell what are the parameters I have to look for..Clock, Framing , Bandwidth etc? Probably there is coordination required with the provider. Any suggestions?? If someone has sample ocnfiguration it will be helpful!!
thanks
06-05-2008 09:39 AM
Fawad,
Please refer to:
http://www.cisco.com/en/US/products/ps6267/prod_installation_guides_list.html
and select
* Catalyst 6500 Series Switch SIP, SSC, and SPA Hardware Installation Guide
and
* Catalyst 6500 Series Switch SIP, SSC, and SPA Software Configuration Guide
HTH,
__
Edison.
Please rate helpful posts
06-05-2008 10:59 AM
hi Edison,
I have a question. On the 7600 router on which we are installing the SIP-400 module and the SPA we do also have SUP-720-3B supervisor.
What is the function SIP-400 is performing which SUP-720 can't? I mean to say do we really need SIP-400?
thanks
Fawad
06-05-2008 11:04 AM
Fawad,
The SIP-400 and the SPA allows you to do some tasks that you are unable to do with the Sup720 alone, for instance - hierarchal QoS.
PFC QoS (the one supplied in the 720) is quite limited.
The following:
describes the feature offered by the SIP. These features aren't available when running just the Sup720.
HTH,
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: