Solved: Device center CDP info on LMS 2.6

eliaspaulos · ‎06-05-2008

on Device Center some devices showing wrong(outdated) or no cdp neighbor information.is there any way to re run or update. Many thanks in Advance.

SNMP walk to the devices showing like this...

ifDescr

RFC1213-MIB::ifDescr.1 = STRING: "Vlan1"

RFC1213-MIB::ifDescr.5001 = STRING: "Port-channel1"

RFC1213-MIB::ifDescr.10101 = STRING: "GigabitEthernet0/1"

RFC1213-MIB::ifDescr.10102 = STRING: "GigabitEthernet0/2"

RFC1213-MIB::ifDescr.10103 = STRING: "GigabitEthernet0/3"

RFC1213-MIB::ifDescr.10104 = STRING: "GigabitEthernet0/4"

RFC1213-MIB::ifDescr.10105 = STRING: "GigabitEthernet0/5"

RFC1213-MIB::ifDescr.10106 = STRING: "GigabitEthernet0/6"

RFC1213-MIB::ifDescr.10107 = STRING: "GigabitEthernet0/7"

RFC1213-MIB::ifDescr.10108 = STRING: "GigabitEthernet0/8"

RFC1213-MIB::ifDescr.10109 = STRING: "GigabitEthernet0/9"

RFC1213-MIB::ifDescr.10110 = STRING: "GigabitEthernet0/10"

RFC1213-MIB::ifDescr.10111 = STRING: "GigabitEthernet0/11"

RFC1213-MIB::ifDescr.10112 = STRING: "GigabitEthernet0/12"

RFC1213-MIB::ifDescr.10113 = STRING: "GigabitEthernet0/13"

RFC1213-MIB::ifDescr.10114 = STRING: "GigabitEthernet0/14"

RFC1213-MIB::ifDescr.10115 = STRING: "GigabitEthernet0/15"

RFC1213-MIB::ifDescr.10116 = STRING: "GigabitEthernet0/16"

RFC1213-MIB::ifDescr.10117 = STRING: "GigabitEthernet0/17"

RFC1213-MIB::ifDescr.10118 = STRING: "GigabitEthernet0/18"

RFC1213-MIB::ifDescr.10119 = STRING: "GigabitEthernet0/19"

RFC1213-MIB::ifDescr.10120 = STRING: "GigabitEthernet0/20"

RFC1213-MIB::ifDescr.10121 = STRING: "GigabitEthernet0/21"

RFC1213-MIB::ifDescr.10122 = STRING: "GigabitEthernet0/22"

RFC1213-MIB::ifDescr.10123 = STRING: "GigabitEthernet0/23"

RFC1213-MIB::ifDescr.10124 = STRING: "GigabitEthernet0/24"

RFC1213-MIB::ifDescr.10125 = STRING: "GigabitEthernet0/25"

RFC1213-MIB::ifDescr.10126 = STRING: "GigabitEthernet0/26"

RFC1213-MIB::ifDescr.10127 = STRING: "GigabitEthernet0/27"

RFC1213-MIB::ifDescr.10128 = STRING: "GigabitEthernet0/28"

RFC1213-MIB::ifDescr.10501 = STRING: "Null0"

Joe Clarke · ‎06-05-2008

You will need CS 3.0.6 and CM 4.0.11. These aren't as big as a 3.0 upgrade, but they aren't small. You'll have to bring down LMS, and probably take an hour to do the updates.

As a workaround in the time being, you can reinitialize your ANI database:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

After a subsequent Data Collection, this problem should be solved.

View solution in original post

Joe Clarke · ‎06-05-2008

This is controlled by Campus Manager Data Collection. If you haven't upgraded from 4.0.9 to 4.0.11, this information could become stale due to bugs.

eliaspaulos · ‎06-05-2008

thanks J. we have a plan to upgrade to 3.0. I think better to wait!! or it's very small patch

can be done easily. I don't want to do 2 times.

any suggestion. big thanks as always!!!

Joe Clarke · ‎06-05-2008

You will need CS 3.0.6 and CM 4.0.11. These aren't as big as a 3.0 upgrade, but they aren't small. You'll have to bring down LMS, and probably take an hour to do the updates.

As a workaround in the time being, you can reinitialize your ANI database:

NMSROOT/bin/perl NMSROOT/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI

After a subsequent Data Collection, this problem should be solved.