06-06-2008 01:41 AM - edited 03-15-2019 11:06 AM
Hi,
I am using Cisco Unity Call Manager 5.1 (3),and the Voice gateway is Cisco2821,and I have 200 IP 7940 G phones nad the PSTN is terminated to cisco 2821 router where the same E1 PRI is also terminated.
Now the problem is from any IP phone to IP phone it is working fine,but when I make a call from IP phone to PSTN phone,the call is landing and the PSTN user pick up call and He/She is able to listen the voice,but the IP phone user is not able to listen the voice.
What could be the problem? I am new to IP telephone.
I have to solve this escalation.
I do not have the configuration.
Thanks and Regards,
S.Venkataraman.
06-06-2008 02:14 AM
Hi,
A couple of quick things...
Have you bound either H323 or MGCP to a specific interface on your router?
Are there any access lists in between your voice gateway and your phones?
Have you got voice rtp send-recv configured on your gateway?
Cheers,
Tim
06-06-2008 02:16 AM
Sorry should also include link to this doc! good place to start.
http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a008009484b.shtml
Cheers,
Tim
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: