06-06-2008 02:43 AM - edited 03-13-2019 05:19 PM
Hi,
We have 2 x 4506 switches & phones plugged into both in voice vlan 220.
Vlan 220 is trunked between both switches.
We have a Nice recorder with one span NIC, which plugs into switch one Gi2/8.
I have the below config on switch 1.
monitor session 1 source vlan 220
monitor session 1 destination interface Gi2/8
It seems that only phones on switch one are recorded and phones on switch 2 are not.
I have tried using RSPAN, but with that config even phones on switch one are not recorded.
Your help will be much appreciated.
Regards,
Irfaan
06-06-2008 02:46 AM
Hi, can you span on the switch that connected the GW ? This way all calls to PSTS should be recordable.
06-06-2008 02:59 AM
We have 2 gateways. One on each switch. So its the same problem. By doing it on the vlan we can record internal and external calls, but only for switch one.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: