06-06-2008 11:08 AM - edited 03-03-2019 10:16 PM
Dear all
I have seven hub with several routers at remotes.
now each router at remote has it hub router. but i to establish other tunnel to other hub but with priority issue for redundancy.
any document or sample?
regards to all
06-06-2008 12:57 PM
Yes, the examples are in the dmvpn design guide and white papers.
Note, you don't necessarily need to use another tunnel. With proper configuration you can use a single p-to-mp tunnel and multiple hubs within it.
hope this helps, please rate post if it does!
06-06-2008 01:01 PM
Hi,
Take a look at http://www.cisco.com/en/US/tech/tk583/tk372/technologies_white_paper09186a008018983e.shtml at the "Dual Hub - Dual DMVPN Layout" section. That should get you going.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide