06-08-2008 02:37 AM - edited 03-03-2019 10:16 PM
I have a 2651 that I tryed to upgrade the IOS by xmodem but end up deleting all configuration files, good thing is that is a lab unit.
I get the following when booting:
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
System Bootstrap, Version 12.2(10r)1, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2002 by cisco Systems, Inc.
C2600 platform with 98304 Kbytes of main memory
rommon 1 >
Can someone explain step by step what files need to be loaded.
Regards
Tiago Dias
06-08-2008 05:43 AM
you've deleted the operating system by mistake
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a0080094a0b.shtml
See that article, note the links at the end telling you how to reinstall IOS using tftpdnld (if available) or xmodem (if you've got a few hours to spare)
06-09-2008 06:39 AM
sirdudesly,
I am trying the setps that you mentioned, but the problem is that I am only connecting to the router by console port COM1, and the tftpd32 that I have only listen to the ethernet port, so I can not send the image file.
And by xmodem I get to many errors and the connection drops.
sugestions?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: