ASSERTION FAILED: in AS 5300

Unanswered Question
Jun 9th, 2008

i am getting the following error in my AS5300 access server

ASSERTION FAILED: file "../as/if_as_pm7366.c", line 129

6

ASSERTION FAILED: file "../as/if_as_pm7366.c", line 149

running ver is c5300-i-mz.123-26.bin

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Mon, 06/09/2008 - 02:58

ARVINDER

ASSERTION FAILED is a symptom of a software problem. As a short term action I wonder if a reload of the AS5300 would stop the error messages. Probably a longer term action would be to upgrade to a newer version of code.

If the router is under a maintenance contract it would be appropriate to open a case with Cisco TAC about this.

HTH

Rick

Sushil Kumar Katre Mon, 06/09/2008 - 04:27

Hi ARVINDER,

I have no idea about this error. But while going through few documents I stepped on to this bug -

CSCdm55659

The CT1 PRI on the double-density version of a Cisco AS5300 series access server might not operate properly when it is configured with a channel group and Frame Relay encapsulation on the serial port. The following error message might result when you configure the channel group:

23:31:18: ASSERTION FAILED: file "../as/if_as_pm7366.c", line 1291 23:31:18: ASSERTION FAILED: file "../as/if_as_pm7366.c", line 1491

There is no workaround.

http://www.cisco.com/en/US/docs/ios/12_0/release/notes/120tcavs.html - Resolved Caveats-Cisco IOS Release 12.0(7)T

I know you are running 12.3 IOS release. But though this might give you some clue.

-> Sushil

Actions

This Discussion