Vlan ID Translation - Vlan Mapping

Unanswered Question
Jun 9th, 2008
User Badges:

Hi all,

I'm having issue in configuring Vlan-to-Vlan mapping.

I'd like to "masking" a Vlan ID "X" in Vlan "Y" for transporting it, using a Layer 2 Trunk starting from a 6500 IOS Switch, to another switch (6500 CatOS)

I used command found on Cisco docs and put them only to the first switch (6500 IOS).

Does anybody know if I must put other IOS command to the second one?

In attachment my switches configuration.

Thanx in adv 4 any help.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
hadbou Fri, 06/13/2008 - 06:00
User Badges:
  • Bronze, 100 points or more

This example shows how to map another VLAN to an existing VLAN group name:


Console> (enable) set dot1x vlan-group engg-dept 4

Vlan 4 is successfully mapped to vlan group engg-group.

I think that the command should be given on the second awitch also with the vlan id of the first switch.


for more information about this command refer:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/8.x/command/reference/set_f_l.html#wp1070704

Actions

This Discussion