URGENT 3550 help needed

Unanswered Question
Jun 9th, 2008
User Badges:

I've been doing SP CCIE labs daily without any HW issues. Today when the temp hit 90degrees I started having HW related problems with one of my 3550 switches.


I'm running a fan in the rear of the rack and the "sh env all" states everything is in the green.


But after an hour or so, I start getting massive interface flaps on SW2.


After a reload I get the following:


Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces

FastEthernet0/1 failed POST

FastEthernet0/2 failed POST

FastEthernet0/3 failed POST

FastEthernet0/4 failed POST

FastEthernet0/5 failed POST

FastEthernet0/6 failed POST

FastEthernet0/7 failed POST

FastEthernet0/8 failed POST

FastEthernet0/9 failed POST

FastEthernet0/10 failed POST

FastEthernet0/11 failed POST

FastEthernet0/12 failed POST


Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces

FastEthernet0/17 failed POST

FastEthernet0/18 failed POST

FastEthernet0/19 failed POST

FastEthernet0/20 failed POST

FastEthernet0/21 failed POST

FastEthernet0/22 failed POST

FastEthernet0/23 failed POST

FastEthernet0/24 failed POST

FastEthernet0/13 failed POST

FastEthernet0/14 failed POST

FastEthernet0/15 failed POST

FastEthernet0/16 failed POST


I wait a couple hours and start over and the SW2 post completes without issue, but after awhile the same problem starts up again.


Is my switch dying?????

Or is it the Heat????

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Mark Yeates Mon, 06/09/2008 - 19:14
User Badges:
  • Gold, 750 points or more

Unfortunately I don't think there is a fix aside from RMA. Are there any other log messages that might have anymore insight as to why the the ports failed POST?



Mark

Actions

This Discussion