06-09-2008 10:46 PM - edited 03-09-2019 08:52 PM
Hi, everyone
I have a question about CAR on router. The router have a G703 E1 WAn interface and an ethernet interface. My goal is to rate-limiting access-rate of every ip address under ethernet, that is, for example, every PC under the ethernet interface cannot over 1Mb/s.
Can CAR on the router achieve this goal? If be, how to achieve it?
Very Thanks.
Tao
06-10-2008 12:35 AM
Yes it can, but Policing is the new way to go about things.
Have a look at:
http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800d7276.shtml
Sample CAR config:
access-list 101 permit ip host
access-list 102 permit ip host
interface FastEthernet0/0
rate-limit input access-group 101 1000000 35000 35000 conform-action transmit exceed-action drop
rate-limit input access-group 102 1000000 35000 35000 conform-action transmit exceed-action drop
Regards
Farrukh
06-11-2008 12:32 AM
Farrukh
Very thanks for your reply.
My purpose is to put a maximum access-rate limit for every PC in a LAN. So if there are 100 PCs in the LAN, with the above CAR, I have to make 100 ACL, as below:
access-list 101 permit ip host 192.168.1.1 any
access-list 102 permit ip host 192.168.1.2 any
If so, there will be too many acl items. And I don't know how many acl can we applied under FastEthernet0/0. So it maybe unreasonable.
I know Huawei's Quidway router can support this feature, as below:
qos carl 1 source-ip-address range 192.168.0.2 to 192.168.0.200 per-address
I want to know Cisco can support this feature, or have some methods to achieve it.
Very Thanks
Tao
06-11-2008 05:20 AM
I'm sorry, I don't know about any such feature in IOS.
Regards
Farrukh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: