cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
599
Views
0
Helpful
8
Replies

Trunk, HWIC and ping issues

mathieu.ploton
Level 1
Level 1

Hello,

I've a tricky issue on a very simple configuration, maybe you can turn my light on it :

I've got this :

(VLAN 1 is the default vlan)

Router 6xxx ===TRUNK===gi0/1 SWITCH L2 fa0/3---VLAN100---- F0/2/0 HWIC 2811

On the 6xxx :

int vlan 100

ip address 192.168.0.1 255.255.255.0

The trunk allow vlan 100.

On the switch L2 :

trunk side:

sh int g0/1 switchport

Name: Gi0/1

Switchport: Enabled

Administrative mode: trunk

Operational Mode: trunk

Administrative Trunking Encapsulation: dot1q

Operational Trunking Encapsulation: dot1q

Negotiation of Trunking: Disabled

Access Mode VLAN: 0 ((Inactive))

Trunking Native Mode VLAN: 1 (default)

Trunking VLANs Enabled: ALL

Trunking VLANs Active: 1,3-7,10,11,13,15,18,20,100,101,200,226

Pruning VLANs Enabled: 2-1001

Priority for untagged frames: 0

Override vlan tag priority: FALSE

Voice VLAN: none

Appliance trust: none

Self Loopback: No

fa0/3 side:

interface FastEthernet0/3

duplex full

speed 100

switchport access vlan 100

switchport trunk encapsulation dot1q

On the router :

interface Vlan100

ip address 192.168.0.2 255.255.255.0

interface FastEthernet0/2/0

switchport access vlan 100

duplex full

speed 100

-------------

The issue is that from the 6xxx, I can't ping 192.168.0.2 and from the 2811 i can't ping 192.168.0.1.

When i do a "debug arp" on the 2811 I realized that it has received the arp request from the 6xxx and that it answers it, seems that the answer never end to the 6xxx...

If you have an idea, it drives me nuts...

8 Replies 8

Edison Ortiz
Hall of Fame
Hall of Fame

Please post show interface vlan 100 from the 6500 switch.

__

Edison.

sh int vlan 100

Vlan100 is up, line protocol is up

Hardware is Cat6k RP Virtual Ethernet, address is 0008.7ca6.cb02 (bia 0008.7ca6.cb02)

Description: Vlan VoIP

Internet address is 192.168.0.2/24

MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue :0/40 (size/max)

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

239414 packets input, 13658122 bytes, 0 no buffer

Received 239312 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

2558 packets output, 183906 bytes, 0 underruns

0 output errors, 3 interface resets

0 output buffer failures, 0 output buffers swapped out

Looks good.

1) Let's see show interface gx/x switchport from the 6500 switch.

2) Let's see show vlan from the 6500 and L2 switch and show vlan-switch from the router.

3) In the L2 switch, force the access mode on F0/3 interface switchport mode access and remove the trunk reference.

HTH,

__

Edison.

1) The commutation part of the 6xxx is in CatOS :

sh port 4/7

Port Name Status Vlan Duplex Speed Type

----- -------------------- ---------- ---------- ------ ----- ------------

4/7 SWL2 connected trunk full 1000 1000BaseSX

Port Security Violation Shutdown-Time Age-Time Max-Addr Trap IfIndex

----- -------- --------- ------------- -------- -------- -------- -------

4/7 disabled shutdown 0 0 1 disabled 16

Port Num-Addr Secure-Src-Addr Age-Left Last-Src-Addr Shutdown/Time-Left

----- -------- ----------------- -------- ----------------- ------------------

4/7 0 - - - - -

Port Broadcast-Limit Multicast Unicast Total-Drop Action

-------- --------------- --------- ------- -------------------- ------------

4/7 - - - 0 drop-packets

Port Send FlowControl Receive FlowControl RxPause TxPause

admin oper admin oper

----- -------- -------- --------- --------- ---------- ----------

4/7 desired off off off 0 0

Port Status Channel Admin Ch

Mode Group Id

----- ---------- -------------------- ----- -----

4/7 connected auto silent 341 0

Port Status ErrDisable Reason Port ErrDisableTimeout Action on Timeout

---- ---------- ------------------- ---------------------- -----------------

4/7 connected - Enable No Change

Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize

----- ---------- ---------- ---------- ---------- ---------

4/7 0 0 0 0 0

Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants

----- ---------- ---------- ---------- ---------- --------- --------- ---------

4/7 0 0 0 0 0 0 -

Port Last-Time-Cleared

----- --------------------------

4/7 Fri May 30 2008, 08:34:00

Idle Detection

--------------

--

2)

6xxx :

sh vlan

VLAN Name Status IfIndex Mod/Ports, Vlans

---- -------------------------------- --------- ------- ------------------------

1 default active 5 1/1-2

2/1-2

3/3-21

4/1,4/6

5/8,5/12,5/15

6/5-16

100 VoIP active 107

1002 fddi-default active 6

1003 trcrf-default active 9

1004 fddinet-default active 7

1005 trbrf-default active 8 1003

VLAN Type SAID MTU Parent RingNo BrdgNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ ------ ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

3 enet 100003 1500 - - - - - 0 0

4 enet 100004 1500 - - - - - 0 0

5 enet 100005 1500 - - - - - 0 0

6 enet 100006 1500 - - - - - 0 0

7 enet 100007 1500 - - - - - 0 0

10 enet 100010 1500 - - - - - 0 0

11 enet 100011 1500 - - - - - 0 0

13 enet 100013 1500 - - - - - 0 0

15 enet 100015 1500 - - - - - 0 0

18 enet 100018 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

100 enet 100100 1500 - - - - - 0 0

101 enet 100101 1500 - - - - - 0 0

200 enet 100200 1500 - - - - - 0 0

226 enet 100226 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 trcrf 101003 4472 1005 0xccc - - srb 0 0

1004 fdnet 101004 1500 - - - - - 0 0

1005 trbrf 101005 4472 - - 0xf ibm - 0 0

VLAN MISTP-Inst DynCreated RSPAN

---- ---------- ---------- --------

1 - static disabled

3 - static disabled

4 - static disabled

5 - static disabled

6 - static disabled

7 - static disabled

10 - static disabled

11 - static disabled

13 - static disabled

15 - static disabled

18 - static disabled

20 - static disabled

100 - static disabled

101 - static disabled

200 - static disabled

226 - static disabled

1002 - static disabled

1003 - static disabled

1004 - static disabled

1005 - static disabled

VLAN AREHops STEHops Backup CRF 1q VLAN

---- ------- ------- ---------- -------

1003 7 7 off

ROUTER :

sh vlan-switch

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/2/1, Fa0/2/2, Fa0/2/3

100 VoIP_Alcatel active Fa0/2/0

1002 fddi-default active

1003 token-ring-default active

1004 fddinet-default active

1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 1002 1003

10 enet 100010 1500 - - - - - 0 0

15 enet 100015 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

100 enet 100100 1500 - - - - - 0 0

200 enet 100200 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 1 1003

1003 tr 101003 1500 1005 0 - - srb 1 1002

1004 fdnet 101004 1500 - - 1 ibm - 0 0

1005 trnet 101005 1500 - - 1 ibm - 0 0

3) DONE but it's still not working

Thank you again

L2 switch :

sh vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/4, Fa0/6, Fa0/7,

Fa0/8, Fa0/9, Fa0/10, Fa0/11,

Fa0/12, Fa0/13, Fa0/14, Fa0/15,

Fa0/16, Fa0/17, Fa0/18, Fa0/20,

Fa0/21, Fa0/22, Fa0/23, Fa0/24,

Fa0/26, Fa0/27, Fa0/31, Fa0/32,

Fa0/33, Fa0/34, Fa0/35, Fa0/36,

Fa0/37, Fa0/38, Fa0/39, Fa0/40,

Fa0/41, Fa0/42, Fa0/43, Fa0/44,

Fa0/45, Fa0/46, Gi0/2

100 VoIP active Fa0/2, Fa0/3

1002 fddi-default active

1003 trcrf-default active

1004 fddinet-default active

1005 trbrf-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------

1 enet 100001 1500 - - - - - 0 0

3 enet 100003 1500 - - - - - 0 0

4 enet 100004 1500 - - - - - 0 0

5 enet 100005 1500 - - - - - 0 0

6 enet 100006 1500 - - - - - 0 0

7 enet 100007 1500 - - - - - 0 0

10 enet 100010 1500 - - - - - 0 0

11 enet 100011 1500 - - - - - 0 0

13 enet 100013 1500 - - - - - 0 0

15 enet 100015 1500 - - - - - 0 0

18 enet 100018 1500 - - - - - 0 0

20 enet 100020 1500 - - - - - 0 0

100 enet 100100 1500 - - - - - 0 0

101 enet 100101 1500 - - - - - 0 0

200 enet 100200 1500 - - - - - 0 0

226 enet 100226 1500 - - - - - 0 0

1002 fddi 101002 1500 - - - - - 0 0

1003 trcrf 101003 4472 1005 3276 - - srb 0 0

1004 fdnet 101004 1500 - - - ieee - 0 0

1005 trbrf 101005 4472 - - 15 ibm - 0 0

VLAN AREHops STEHops Backup CRF

---- ------- ------- ----------

1003 7 7 off

Looks good.

You don't have any ACL on any of the interfaces or VACL in either of the switches, right?

Can you connect the router directly to the 6500 switch for testing purposes? Does it work then?

If you were to create a SVI (Switch Virtual Interface) in the L2 switch for Vlan 100, can you ping the 6500 switch and the router?

__

Edison.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: