ATM T-1 Card with Serial T-1's

Answered Question
Jun 10th, 2008
User Badges:

I know this is a very naive and novice question, but I have 2 point to point T-1's that I would like to connect to the following card in a 7206 VXR:


PA-A3-8T1IMA=


Is there any confiration that will allow me to utilize this card with serial T-1's?

Correct Answer by paolo bevilacqua about 8 years 11 months ago

Hi,


You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.


Hope this helps, please rate post if it does!




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
paolo bevilacqua Tue, 06/10/2008 - 10:23
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


You can use that card, but on the other side of the circuits you will need another ATM IMA interface of some kind. You cannot connect ATM IMA to non-IMA equipment directly, and there are no workarounds to that.


Hope this helps, please rate post if it does!




spfeffer Tue, 06/10/2008 - 10:24
User Badges:

That's what I thought...hmmmm...I'll have to dig around in the parts drawer and see what I can find. Thanks.

paolo bevilacqua Tue, 06/10/2008 - 10:42
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You're welcome, please remember to rate useful posts.

Actions

This Discussion