Cisco Pix 501 passthru from Wan1 (Internet) to LAN (Office)

Unanswered Question
Jun 10th, 2008
User Badges:

We're having issues with a PIX 501 not wanting to let traffic thru a tunnel.


I'm pretty sure it has to do with nat and nat traversal or no nat ... etc.


if my internal network is 192.168.X.0/24 and my WAN1 ip is 76.77.78.79, and that the WAN1 ip is coming from PPPoE.


i can get this far:

fixup protocol pptp 1723

access-list outside_access_in permit tcp any eq pptp any eq pptp

access-list outside_access_in permit gre any any

static (inside,outside) tcp 76.77.78.79 pptp 192.168.X.10 pptp netmask 255.255.255.255 0 0

access-group outside_access_in in interface outside

route inside 192.168.X.1 255.255.255.255 192.168.X.1 1

sysopt connection permit-ipsec

sysopt connection permit-pptp


Am i forgetting something ?


Thank you for any replies

Michel

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
MComeauS2S Wed, 06/11/2008 - 14:39
User Badges:

Finally figured out that the VPN pass-thru is fine.


I am now trying to figure out why i am unable to ping or access anything else but the Win2K3 server that hosts the vpn server.


Anyone has a clue ?

Actions

This Discussion