We're having issues with a PIX 501 not wanting to let traffic thru a tunnel.

I'm pretty sure it has to do with nat and nat traversal or no nat ... etc.

if my internal network is 192.168.X.0/24 and my WAN1 ip is 76.77.78.79, and that the WAN1 ip is coming from PPPoE.

i can get this far:

fixup protocol pptp 1723

access-list outside_access_in permit tcp any eq pptp any eq pptp

access-list outside_access_in permit gre any any

static (inside,outside) tcp 76.77.78.79 pptp 192.168.X.10 pptp netmask 255.255.255.255 0 0

access-group outside_access_in in interface outside

route inside 192.168.X.1 255.255.255.255 192.168.X.1 1

sysopt connection permit-ipsec

sysopt connection permit-pptp

Am i forgetting something ?

Thank you for any replies

Michel