06-11-2008 12:17 AM - edited 03-03-2019 10:18 PM
Hi, just wondered if it really mattered what I use for my routing. I have a core Nortell switch and a Cisco ASA 5520 firewall. There seems to me a mixture of routing on each of them. The core switch has a 0.0.0.0 0.0.0.0 <ASA IP> and I see the ASA has some routes the Core could do, does it really matter which one does it?
Thanks
Solved! Go to Solution.
06-11-2008 12:29 AM
I would use the switch if its a Layer 3 switch and will do this in hardware.
Also this will keep the processing of the rules on the ASA to an acceptable level as this is done in software.
Does not matter which one does it as long as you Network is secure.
06-11-2008 12:29 AM
I would use the switch if its a Layer 3 switch and will do this in hardware.
Also this will keep the processing of the rules on the ASA to an acceptable level as this is done in software.
Does not matter which one does it as long as you Network is secure.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: